Re-bar Chain Cutter

Model S

12 lbs

Convenient to use at any angle and weighing less than 12 lbs, the Model S can be activated by any electric, gasoline, hand, battery or air operated hydraulic pump capable of developing 10,000 psi and having free flow return through the pressure line. The front blade can be adjusted to proper cutting clearance after sharpening, and the back blade is fixed.

Requires an external power source. Can use any electric, gasoline, hand, battery, or air operated hydraulic pump capable of developing 10,000 psi and having free flow return through the pressure line.

Please specify if tool will be used for cutting round chain; a modification of the cutting head is required.

Re-bar chain cutter model s
  • 1/2″ prestressed concrete strand
  • 1/2″ mild steel round chain
  • 5/8″ reinforced bar
Model S diagram

Click diagram to enlarge

Part no.Description
S-2Adjusting screw
S-3Blade holding screw
S-4Rear blade (moving blade)
S-5Front blade
S-6Blade pin
S-7Ram
S-8Cup leather
S-9Cup leather retainer
S-10Retracting spring
S-12End plate
S-13End plate screw
S-15Ram retainer screw
S-16“O” ring
S-17Locking wedge
S-18Set screw
S-19Spring washers (2)
S-80Cutting Head
S-81Pump Only
S-8210 ft. Hydraulic Hose
S-90Pistol grip handle
S-94Model S-94 Complete